If you own Skullcandy Sesh headphones and are experiencing any troubleshooting issues such as connectivity problems or audio glitches, performing a reset might help resolve these issues. In this quick step-by-step guide, we will walk you through the process of resetting your Skullcandy Sesh headphones, ensuring that you can enjoy an uninterrupted and high-quality audio experience once again.
Gather The Necessary Equipment
Before you begin the process of resetting your Skullcandy Sesh headphones, it is important to gather all the necessary equipment. Having everything prepared will make the process smoother and more efficient.
The equipment you will need includes a USB charging cable and a compatible device such as a smartphone or computer. Ensure that the USB cable is in good working condition and capable of connecting your headphones to a power source.
Having your headphones fully charged beforehand is also crucial for a successful reset. If your headphones are low on battery, plug them into a power source and allow them to charge fully before proceeding.
By gathering all the necessary equipment, you eliminate the potential frustration of interrupting the reset process due to missing items. Taking the time to prepare beforehand will ensure a seamless experience and increase the chances of resetting your Skullcandy Sesh headphones without any issues.
Turn Off The Skullcandy Sesh Headphones
Before attempting to reset your Skullcandy Sesh headphones, it is important to ensure they are turned off. Turning off the headphones will prevent any interruptions during the reset process and ensure a smooth and successful reset. To turn off the Skullcandy Sesh headphones, follow these simple steps:
1. Locate the power button on your headphones. The power button is usually located on one of the earbuds.
2. Press and hold the power button for a few seconds until you see the LED lights on the headphones turn off. This indicates that the headphones have been successfully turned off.
3. Make sure to completely power off both earbuds. Repeat the process for the other earbud if necessary.
By turning off the Skullcandy Sesh headphones before initiating the reset process, you can eliminate any potential issues that may arise due to the headphones being powered on. This will allow for a more effective reset, increasing the chances of a successful outcome.
Locate The Buttons And Controls On The Headphones
When it comes to resetting your Skullcandy Sesh headphones, it’s essential to familiarize yourself with the buttons and controls first. The location of these buttons may vary depending on the specific model you own, so take a close look at your headphones before proceeding.
Typically, the Skullcandy Sesh headphones feature a multifunction button on each earbud. This button usually allows you to play and pause music, answer and end calls, as well as activate voice assistants. Additionally, there may be volume buttons or touch-sensitive areas on the earbuds for controlling the audio levels.
Whether your headphones have physical buttons or touch controls, find and identify them carefully. Take note of their positions to avoid any confusion during the reset process. Knowing the exact location of these buttons will help you press and hold them correctly when initiating the reset.
Now that you have located the buttons and controls on your Skullcandy Sesh headphones, you are ready to proceed with the reset process.
Press And Hold The Buttons To Initiate The Reset Process
To reset your Skullcandy Sesh headphones, you need to follow a simple button combination process. Begin by ensuring that the headphones are turned off. Then, locate the buttons or controls on the headphones. Typically, the Skullcandy Sesh headphones have buttons on both earbuds.
To initiate the reset process, press and hold the buttons simultaneously for a few seconds. The exact buttons to press may vary depending on the model of your Skullcandy Sesh headphones, so consult the user manual if you’re unsure.
Once you press and hold the buttons, you should notice the LED lights on the headphones start flashing. This flashing indicates that the reset process has been initiated. Make sure to continue holding the buttons until you see the flashing lights.
It’s crucial to keep in mind that the duration for which you need to hold the buttons to initiate the reset process may differ for different models. Refer to the instructions provided by Skullcandy or consult the user manual for precise information.
Wait For The LED Lights On The Headphones To Start Flashing
After pressing and holding the buttons to initiate the reset process on your Skullcandy Sesh headphones, you need to wait for the LED lights on the headphones to start flashing. This flashing light is an indication that the reset process has been successfully initiated.
The LED lights on the Skullcandy Sesh headphones are located on the earbuds themselves. They usually flash in a specific pattern to indicate different functions or status. In this case, the flashing lights signify that the headphones are being reset.
The duration of the flashing lights may vary, but on average, it takes around 10 to 15 seconds for the LED lights to start flashing. Make sure to keep a close eye on the lights during this time to ensure you don’t miss when they begin flashing.
The flashing lights serve as a visual cue that the resetting process is in progress and should not be interrupted. It is crucial to wait for this step to be completed before moving on to the next step in the reset process.
Release The Buttons Once The Lights Begin Flashing
When performing a reset on your Skullcandy Sesh headphones, it is crucial to know when to release the buttons. Once you have pressed and held the buttons to initiate the reset process, you need to carefully monitor the LED lights on the headphones.
After a few seconds of holding the buttons, you will notice the LED lights on the headphones start to flash. This flashing indicates that the reset process has been triggered and is now in progress. It is at this point that you can release the buttons.
Releasing the buttons at the right time is essential to ensure that the reset is successful. If you release the buttons too early, the reset may not be initiated, and you will need to start the process again. On the other hand, if you hold the buttons for too long, it may result in a different action or function.
By following this step correctly and precisely, you can proceed to the next stage of reconnecting the headphones to your device and testing them to verify if the reset was indeed successful.
Reconnect The Headphones To Your Device
After successfully resetting your Skullcandy Sesh headphones, it is important to reconnect them to your device. Here is a step-by-step guide on how to do it:
1. Turn on the Bluetooth on your device: Make sure the Bluetooth on the device you want to connect the headphones to is enabled. This is usually found in the settings menu.
2. Put the headphones into pairing mode: Press and hold the button on the headphones that controls the Bluetooth pairing. This button is usually located on the side of one of the earbuds. Hold it until you see the LED lights on the earbuds start flashing.
3. Find the Skullcandy Sesh on your device: In the Bluetooth settings on your device, scan for available devices. Look for “Skullcandy Sesh” in the list of available devices and select it.
4. Complete the pairing process: Once you select the Skullcandy Sesh, your device will attempt to pair with the headphones. Follow any on-screen instructions that may appear to complete the pairing process. This may include confirming a passcode.
5. Test the connection: Once the pairing process is complete, play some audio on your device to test the connection. Make sure the sound is coming through the Skullcandy Sesh headphones and adjust the volume as needed.
By following these steps, you will be able to reconnect your Skullcandy Sesh headphones to your device after resetting them. Enjoy your music or audio with a refreshed connection!
Test The Headphones To Ensure The Reset Was Successful
After successfully resetting your Skullcandy Sesh headphones, it is important to test them to ensure that the reset was effective. Testing your headphones after a reset will help you determine if all the functionalities and features are working as expected.
To test your headphones, first, turn them on by pressing the power button. Confirm that the LED lights come on, indicating that they are powered and ready to connect. Then, connect your Skullcandy Sesh headphones to your device using the appropriate method, such as Bluetooth pairing.
Once connected, play audio through your headphones to ensure that sound is clear and balanced. Test both the left and right channels independently by playing audio that pans from left to right. Ensure that the audio splits correctly between the two earbuds.
Additionally, utilize any control buttons or features on your headphones to check if they respond properly. Adjust the volume, skip tracks, and use any other available functions to ensure their full functionality.
By thoroughly testing your Skullcandy Sesh headphones after resetting, you can guarantee that they are in proper working condition and ready to provide you with an immersive audio experience once again.
FAQs
1. How do I reset my Skullcandy Sesh headphones?
To reset your Skullcandy Sesh headphones, follow these steps:
1. Put both earbuds inside the charging case.
2. Close the lid of the charging case.
3. Open the lid and take out both earbuds.
4. Press and hold the button on each earbud for about 10 seconds until the LED light on both earbuds flashes red and blue.
5. Place the earbuds back into the charging case and close the lid.
6. The reset process is complete. Now you can take the earbuds out of the case and pair them again with your device.
2. Why would I need to reset my Skullcandy Sesh headphones?
There are several reasons why you might need to reset your Skullcandy Sesh headphones. Resetting can help resolve various issues such as connection problems, unresponsive controls, or audio playback glitches. It is a simple troubleshooting step that can often fix these issues and restore your headphones to their normal functioning.
3. Will resetting my Skullcandy Sesh headphones delete my device pairing?
No, resetting your Skullcandy Sesh headphones will not delete your device pairing. When you reset the headphones, it clears any existing connections and settings, but it does not remove the Bluetooth pairing information. After the reset, you will need to pair the headphones again with your device, but your device will remember the previously paired Skullcandy Sesh and re-establish the connection without any issues.
Final Verdict
In conclusion, resetting your Skullcandy Sesh headphones is a simple process that can solve various issues such as connectivity problems or audio glitches. By following the step-by-step guide provided, you can easily reset your headphones and restore them to their default settings. Remember to make sure your headphones are fully charged and follow the instructions carefully to ensure a successful reset. With this quick and effective solution, you can enjoy uninterrupted and high-quality audio experiences with your Skullcandy Sesh headphones.